Wednesday, February 25, 2009

P-63 Kingcorbra

The P-63 Kingcobra or P-39 Airacobra is the flag ship for Slope Scale and has been the most popular kit over the years. The flight performance is just a little better than most any other PSS plane. The reason for this is hard to explain. The design differs little from most of the other kits, yet it flies better. The airfoil was designed for this plane only!
(rg-14 mod)

Short kit......200.00 tax $ shipping included
clear canopy $20.00

P-51B Mustang

The P-51 Mustang has a wing span of 48" and is liked by Everyone. As with all the kits I sell this one features a fiberglass fuselage seamed in the mold, with canopy frame detail molded in. Fiberglass hatch, and scoop. CnC Wing cores are blue foam, modified RG-14. Build it in the low 30 oz range. A time tested Slope Scale design

Short Kit.......$200.00 tax & shipping included


This was designed by Brain Laird to provide a more scale looking F-20 sloper. Most of the other F-20 kits are stretched, thinned and rather un-f20 looking. This one was also designed to reduce the pitch instability that most F-20 slopers suffer from. This instability comes from the short tail moment and from the horizontal stab being directly in line with the wing. At slow speeds this causes some elevator blanking, resulting in minor pitch oscillations. This F-20 was designed to reduce this while still looking like a real F-20.

The kit features a fiberglass fuselage with a separate hatch and belly pan. This reduces the work the builder must do. The wing cores are a modified RG-14 That can be sheeted with 1/16 balsa or 1/64 ply. (as per order)

Flight performance is best when build between 40 and 60 ounces and when flown on a good slope in 20+ mph winds. *This is not a light wind ship.

Short Kit........$225.00 tax & shipping included
clear canopy......$20.00


This 10th scale 262 is a favorite of the founder of Slope Scale. It can be flown with or without the engine nacelles. This was build to offer a more scale subject. The kit features a clear canopy, fiberglass fuselage, and 2 fiberglass engine nacelles. The wings are standard blue foam blocked cnc cut cores, ready for sheeting with 1/16" balsa or ply.

The photo on the left is a typical short kit. no wood no hardware.
Included in the instruction is a list of materials needed to complete the kit.
I only sell short kits for two reasons one is to keep the cost of the kit down. The other is most all intermediate / advance builders have a preference as to wood (balsa bass or ply) and hardware.

Short Kit......$300.00 tax shipping included


The BD-5 is a real fun plane to fly. Tight roles, big loops, great stall turns. Breaking the speed limit is not a problem.
Another Slope Scale This kit features a fiberglass fuselage seamed in the mold, with fiberglass hatch . Wing cores are blue foam cnc cut , modified RG-14 . This one can be build from the low 30 oz range, up to as high as you dare go.

Short Kit..... $200.00 tax & shipping included

SU-25 Frogfoot

The Czech Su-25 carried a unique marking on the tail. The frog holds a Soviet T-34 tank in its hand
There is a three piece mold for the fuse but only 4 parts were pulled from it, mine is number two. I really like the way it flies but I spent so much time on the paint. The Frogfoot doesn't get much air time.not for sell Removed from production

Tuesday, February 24, 2009

F-86 Sabre

The F86 this one took home first place at the slope fest in Cajon Ca. The plane featured hear tip the scale at 85 oz. But they fly better at about 65 to 70 oz. I could go on and on but the picture says it all!

Short Kits Removed from production


This is a quick little plane with a very scale look. The wingspan is only 41" Fuselage is my stander with the hatch molded in. wing are cnc foam cut. Better to be flown by an experience pilot. those that have them love it.

*Not for lite wind conditions!

Short Kit $ 175.00 tax & shipping included

Monday, February 23, 2009

U-2 spy plane short kit Removed from production


This is my first custum pss slope plane. The plug and mold were made by me. The plane in the photo was built by my friend . It flies well at about 30 to 35 oz.

Short Kits $175.00 tax & shipping included